• LiFePO4 battery with over 3000 cycles while retaining more than 80% capacity.
• 288Wh / 90,000mAh capacity.
• Total output power of up to approximately 328W.
• Two USB-C ports with up to 140W output each.
• Fast charging via USB-C.
• Solar charging up to 120W.
• Car charging up to 120W.
• Built-in foldable fan.
• Integrated phone holder.
• Low weight of approximately 2.66 kg.

• Capacity: 288Wh.
• Equivalent: approximately 90,000mAh.
• Battery type: LiFePO4.
• Cycle life: over 3000 cycles while retaining more than 80% capacity.
• Estimated lifespan: up to approximately 10 years, depending on usage.
• Energy management: MPPT controller and integrated management systems.

The FDC300 is designed to power multiple devices simultaneously through USB-A and USB-C ports, making it suitable for phones, tablets, laptops, and other compatible equipment.

• Declared maximum total output: up to approximately 328W.
• USB-A: 1 × up to 18W.
• USB-C: 2 × up to 140W.
• Additional USB-C: 1 × up to 30W.
• Allows multiple devices to be powered at the same time within the available total power limit.

The two bidirectional 140W USB-C ports can be used both to power connected devices and to recharge the power station.

• USB-C input: up to 2 × 140W.
• 1 × USB-C 140W: approximately 2.28 hours for a full recharge.
• 2 × USB-C, approximately 200W total: approximately 1.6 hours.
• USB-C + Solar: up to 260W total.
• Minimum declared time: approximately 1.23 hours under ideal conditions with USB-C + solar charging.

• Maximum solar input: 120W.
• Solar input voltage: 11.5V-28V.
• Maximum current: 8A.
• Estimated charging time: approximately 2.67 hours under ideal sunlight and panel positioning conditions.
• MPPT controller for efficient solar charging management.

• Maximum car input power: 120W.
• Input: 12V / 10A.
• Estimated recharge time: approximately 2.67 hours.
• Suitable for travel and mobile use.

One of the practical features of the FDC300 is its built-in foldable fan, designed for camping, travel, or situations where additional airflow is useful.

• Fan integrated into the power station body.
• Foldable design to save space.
• Useful for camping and outdoor use.
• No need to carry a separate fan.

The housing includes a dedicated area for positioning a smartphone, allowing it to be supported while charging, watching content, or using it outdoors.

• LiFePO4 battery with high thermal stability.
• Integrated MPPT controller.
• Charging and discharging management.
• Integrated electronic protections for operation within the specified parameters.
• Designed for long-term repeated use.

• Operating temperature: approximately -10°C to 40°C.
• Charging temperature: approximately 0°C to 40°C.

• 288Wh LiFePO4 battery.
• Over 3000 usage cycles.
• Two 140W USB-C ports.
• 120W solar charging.
• 120W car charging.
• Combined charging up to 260W.
• Built-in foldable fan.
• Integrated phone holder.
• Compact and portable design.

• Low weight for easy transport.
• Capacity suitable for camping and travel.
• Fast charging via USB-C.
• Compatible with solar panels.
• Can be recharged from a vehicle.
• Can power multiple devices simultaneously.
• LiFePO4 technology for high long-term durability.
• Integrated fan and phone holder.

• Dimensions: 135 × 135 × 205 mm.
• Weight: approximately 2.66 kg.

The exact package contents may vary depending on the commercial version, but the product is supplied with the accessories required for basic use and charging.

• 1 × FOSSiBOT FDC300 Portable Power Station.
• 1 × Charging cable / cables, depending on the package configuration.
• 1 × User manual.